Amico Apollo MS-SC, Руководство по эксплуатации и техническому обслуживанию

Страница: 6 / 48

6 Amico Beds Corporation
Warnings
WARNING: To avoid risk of electric shock, this equipment must only be connected to a main power supply
with protective earth.
WARNING:
To prevent damage to the AC power cord, remember the following:
• Disconnect the plug from the mains outlet prior to moving the bed.
• Provide some slack in the cord between the bed and the main outlet (i.e., the cord should
not be pulled taut or under tension).
• Try to keep the power cord off of the floor (use the cord clip provided when possible).
This will prevent other equipment from crushing the cable.
WARNING: The multi-pin connector for Nurse Call function is intended only for connection to the hospital’s
nurse station communication system, or medical equipment complying with IEC 60601-1:1988 + A1:1991 +
A2:1995.
WARNING:
The AC power cord is considered a main power isolation device. Avoid plugging the AC power cord
in a hard-to-reach location (e.g., behind equipment or furniture). In the event of an emergency, the power cord
must be readily accessible for disconnection.
To prevent possible equipment damage during bed articulation, position the bed at least 1' (30 cm) away from the
headwall.
Prior to operating the bed movement controls, ensure that all persons or equipment are clear of the bed mechanisms. To
stop a movement, immediately release the button being pressed.
The bed height should be set to the LOWEST POSITION any time the patient will be left unattended. This is to reduce the
risk of injury due to patient falls.
Depending on the condition of the patient, the bed platform should be placed in the FLAT POSITION any time the
patient will be left unattended. This is to reduce the risk of patient entrapment.
The “Lock Out” controls should be used by the caregiver to restrict visitors or patients from accessing the associated
functions. It is recommended to lock any functions that may cause injury to the patient.
Patient's visitors should be instructed not to use the caregiver controls. The visitor may assist the patient via the patient
controls.
Patients should be monitored intermittently to ensure correct patient positioning on the bed and proper usage of
siderails.
Note the location of cords or hoses during bed movements. Proper line management is essential to reduce the chance of
catching or pinching hazards from occurring.
Only use accessories approved for the Apollo MS-SC bed. See “Accessories List” (Page 35) for list of approved accessories
and usage guidelines.