Amico AG series, Руководство пользователя

Страница: 9 / 44

exhaust system unsafe or in noncompliance with any local
codes and/or standards. A CO alarm is highly recommended.
z
Keep hands, feet, clothing, etc., away from drive belts, fans,
and other moving or hot parts. Never remove any fan guard
while the unit is operating.
z Adequate, unobstructed flow of cooling and ventilating air is
critical to correct generator operation. Do not alter the
installation, as this can seriously affect safe operation of the
generator. The generator MUST be operated outdoors.
z When working on this equipment, remain alert at all times.
Never work on the generator regularly, and contact the
nearest authorized dealer for parts needing repair or
replacement.
z Before performing any maintenance on the generator,
disconnect its battery cables to prevent accidental start up.
Disconnect the cable from the battery post indicated by a
NEGATIVE, NEG or (-) first. Reconnect that cable last.
z Never use the generator or any of its parts as a step. Stepping
on the unit can stress and break parts, and may result in
dangerous operating conditions from leaking exhaust gases,
fuel leakage, oil leakage, etc.
z
Do not operate generator in the rain.
ELECTRICAL HAZARDS
*All generators covered by this manual produce dangerous
electrical voltages and can cause fatal electrical shock. Utility
power delivers extremely high and dangerous voltages as does
the generator when it is in operation. Avoid contact with bare
wires, terminals, connections, etc., while the unit is running.
Ensure all appropriate covers, guards and barriers are in place
before operating the generator. If word must be done around an
operating unit, stand on an insulated, dry surface to reduce shock
hazard.
*Do not handle any kind of electrical device while standing in
water, while barefoot, or while hands or feet are wet.
DANGEROUS ELECTRICAL SHOCK MAY RESULT.
*The national electrical code (NEC) requires the frame and
external electrically conductive parts of the generator to be
connected to an approved earth ground. Local electrical codes
6