Amico AG series, Руководство пользователя

Страница: 21 / 44

*Make sure the unit is in a level position.
*Turn the fuel shut-off valve to the “ON” position (figure 9).
*Turn engine ON/OFF switch to ON position (figure 9).
*Move engine CHOKE lever to the START position (figure 10).
*To start engine, firmly grasp the recoil handle and pull slowly
until increased resistance is felt. Pull rapidly up and away.
*When engine starts, move choke lever to 1/2- CHOKE position
until engine runs smoothly and them fully into RUN position. If
engine falters, move choke back out to 1/2- CHOKE position until
engine runs smoothly and then to RUN position.
If engine fires, but does not continue to run,
move choke lever to the START position and repeat starting
instructions.
Figure 9 – fuel shut –off valve
Figure 10 – choke position
Choke position
Chock
lever
Fuel shut
-off valve
18