27.
Reinstall the far end mirror assembly (right detector end) by carefully aligning the dowel pins with the
end cap and slip into place.
28.
Slip screws into place and tighten in a star pattern.
29.
Reattach white detector connector.
30.
Replace the side cover and screws.
31.
Reattach front panel by carefully reconnecting the 3 cables and then front panel screws.
32.
Place both flowmeter knobs back in place and tighten with 1/16” hex key.
33.
Reconnect power plug, protective cover and explosion proof lid.
34.
Reapply power to the Analyzer.
48
