AMI Entertainment Rock-Star Lx, Инструкция по установке и эксплуатации

Страница: 26 / 52

Page 24
Recommended Routine Maintenance
Heat is the biggest enemy of electronic
components. Proper maintenance is essential for
maximum earnings and reliability.
It is very important to keep all cooling fans clean.
Once dust and dirt is visible on a cooling fan, the
airflow is reduced by at least 25%. There are several
cooling fans in the Rock-Star Lx jukebox (see
Figure
1-D , next page).
Recommended preventative maintenance
Routine Service
The following steps take about 3 minutes and should
be performed at each collection.
1. Check that the cabinet cooling fans are not
blocked.
2. Check the CPU fan from the “Health Status”
Screen.
3. Visually inspect the Power Supply Fan for
operation. It should be spinning at a high speed
at all times.
4. Visually inspect the amplifier fan for operation.
It should be spinning at a low speed if not
playing, and a higher speed if playing.
5. Visually inspect the fan at the top of the inside
of the front door. Ensure that air is blowing out
and the fan looks clean.
6. Be sure that nothing is resting on top of a wall
unit or otherwise blocking the airflow around
any machine.
Collecting from the Bill Acceptor
1. Unlock and open the front door.
2. To remove the bill stacker, slide the tab on the
bottom of the bill acceptor towards the front
door and pull the stacker down.
3. Open the side door on the bill stacker to
remove the cash.
4. Slide the bill stacker back on the bill acceptor.
Be sure the green light is on (for MEI, make
sure the green lights/arrows are flashing).
5. Close and lock the front door.
Minor Service
Perform a minimum of every 3 months if operating
more than 14 hours per day, operating where
smoking is allowed, or is otherwise in a dusty
environment. Perform a minimum of every 6 months
if operated less than 14 hours per day and in a very
clean environment. You will need a new, soft 2”
paintbrush*.
1. Gently brush* dirt from the cabinet cooling
fans. Verify fan operation.
2. Brush* dirt from the power supply fan. Verify
fan operation.
3. Brush* dirt from the amplifier fan. Verify fan
operation.
4. Brush* dirt from the fan located inside the
front door at the top of the door. Verify fan
operation.
5. Check the operation of the CPU fan from the
“Health Status” Screen.
6. Listen to the power supply fan and CPU fan
for excessive noise or vibration.
7. Clean the bill acceptor with an approved
cleaning card.
8. Clean the Credit Card Reader with an
approved cleaning card.
9. Clean and calibrate the touchscreen.
Cleaning the Touchscreen
Any standard glass cleaner can be used to clean the
touchscreen. Always spray the glass cleaner on the
cloth or towel and not directly on the touchscreen.
Glass cleaner sprayed directly on the screen could
possibly leak inside and cause damage.
Cleaning the Door Panel
The door panel is made of polycarbonate. We
recommend cleaning with a mild cleaner and a soft
cloth to avoid scratching the surface.
Annual Service
The following steps should be performed every year
in addition to everything in the minor service section.
1. Vacuum the interior of the cabinet and fans.
2. Inspect the power cord for fraying or damage.
3. Check the power ground.
4. Check all LAN connections and wiring.
5. Listen to all speakers to make sure they are
operating correctly.
Scheduled maintenance always
costs less time and money than an
unscheduled breakdown.