Page
9 of 35
Attention: The ST station are intended not for the Repeatereinsatz, since
they run on battery base!
Step 6:
If you have checked the signal connection of the sensors to the control centre
and all stations transmit their signal directly or through stalled Repeater reliably
to the headquarters, you can start with the settings in the control panel.
Perform the installation of the transmitters and sensors as the last step because
an once-mounted transmitter only with some effort can be solved again.
Information about terminating a triggered alarm
If an alarm has been triggered and the multistage alert system has been
selected, a video is playing on the display of the control panel. The goal is to lure
the burglar to the headquarters and from the search the rooms to distract. You
see and hear a waterfall and the chirping of birds. This alarm video is played for
90 seconds, and stops when the unit is moved. The stills of the video disappears
in the background and it is the standard screen of the Android operating system.
To now switch off the alarm, tap the blue Bluetosec symbol in the display, the
statue of the alarm video it opens. In this still image is under the flower (indicated
in the image) below a red circle and arrow a button hidden. Tap the flower and it
opens the PIN-code field. Here you can enter your PIN code, confirm by
pressing the OK key and the alarm will be stopped.
Содержание CT-Sensor
Страница 1: ...Page 1 of 35 ...
