Page
6 of 35
Automatic Maintainance
The Center periodically checks whether a Wi-Fi connection is available. The
headquarters should determine that 3 hours no online synchronization has
occurred, although this option is turned on, the Tablet performs a restart to solve
the problem in this way. If necessary, the checks of the mobile wireless data
connection can be activated daily. For this option, see
ONLINE synchronization
.
In addition, the headquarters and/or the software start every 7 days to ensure an
optimal function.
First steps to setting up
Step 1:
Turn on Control Panel: a short and a long knob is located on the right side of the
control panel. Press the short power button for approx. 3 seconds, the Tablet-PC boots
up and you have several pictures to see. In between the screen goes black sometimes
for 10-15 seconds. Please wait until the startup screen of the control panel is visible.
This may take 1-2 minutes.
Step 2:
Are looking for a central place in your home where you want to place the control panel.
You have the possibility to use the supplied bracket as a table or wall mount.
If you decide to use as a
desk mount
, screw back the aluminum stands on the white
mount.
We recommend a
wall
, because the camera angle is better, insofar as this is possible
in the circumstances. Choose a height between 150 and 170 cm from the ground and
screw the white bracket using the 2 plugs supplied with and screws to the wall.
Make sure that the bracket is attached horizontally to the wall, otherwise it can cause
the automatic rotation of the image in the display. The camera in the middle of the
upper edge of the Tablet PC Control Panel (AlarmTab) should be roughly at eye level.
The camera is then on the side with the Samsung tablet. Is but there is no essential
difference.
Содержание CT-Sensor
Страница 1: ...Page 1 of 35 ...
