Page
21 of 35
Make sure that the control panel has a good internet connection and that the ambient
noise is low when you want to switch by voice command.
You learn the voice command by scrolling down to arming mode
to voice command
press the arrow key
+ new voice command. After that, each additional step will
be explained on the display.
As soon as the screen of your control panel opens, the
microphone
symbol is
displayed in the top left corner. When you see this icon, you can speak the
stored command. Be sure to speak the command at the same volume, accent,
and approximately the same distance from the control panel as you learned the
command.
Wait 2 to 3 seconds after the voice command. The command is now
synchronized with the database online. If the adjustment is successful, the
control panel switches on sharply. This will be displayed.
If the reconciliation was unsuccessful, you have the option to switch by voice
command a second time. If this too is unsuccessful (for example because the
ambient noise is too loud or your voice has changed due to a cold) you can
always use your finger to make the desired arming on the display.
Содержание CT-Sensor
Страница 1: ...Page 1 of 35 ...
