Page
25 of 35
Make sure that the control panel has a good internet connection and that the ambient noise
is low when you want to switch by voice command.
As soon as the screen of your control panel opens, the microphone symbol is displayed in
the top left corner. When you see this icon, you can speak the stored command. Be sure to
speak the command at the same volume, accent, and approximately the same distance from
the control panel as you learned the command.
Wait 2 to 3 seconds after the voice command. The command is now synchronized with the
database online. If the adjustment is successful, the control panel will go out of focus. This
will be displayed.
If the reconciliation was unsuccessful, you have the option to switch by voice command a
second time. If this too is not successful (for example, because the ambient noise is too loud
or your voice has changed because of a cold), you can always use the PIN code to defuse
the control panel.
Disarm on arrival at the control panel
Open the front door, the sensor will start a silent alarm. By default, a delay of 30
seconds is programmed before the control panel sends a message.
You can set this delay in the SETTINGS menu under the item DELAYS SWITCH to
your own requirements.
Now go to the central office. They see the "alarm picture" and hear the sound, which is
to lure a burglar to the central office. Press the hidden character in the image and the
Содержание CT-Sensor
Страница 1: ...Page 1 of 35 ...
