e-mail: [email protected]; [email protected] ; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
Revised 09/2004
S-101
1-29
To adjust for proper functioning - tip the machine to a
vertical position upon its base - crank the machine
with the L.H. handwheel until the roll
n
is at the peak
of the cam as shown.
At this point plunger
o
must have enter slot
p
in cam plate
q
. If it
does not enter freely and
definitely - loosen screw
r
and tap head of
machine
s
to suit.
The above adjustment constututes the line up of an adjustable fly bar machine.
Crank the machine until the roll
n
on lever
t
is
again definitely embraced by cam path
u
on the
cam at
v
, Figure 1 - at this point plunger
w
should have just withdrawn from slot by action
of bracket against lever .
If not, adjust bracket to suit by loosening
screw .
u
v
r
t
n
s
q
o
p
w
ADJUSTMENTS FOR THE ADJUSTABLE FLY BAR MACHINE