Installation
BOSS Scoring Bowler Terminal Consoles
Installation, Operation, Service, and Parts Manual
9
400-286-003 Rev. New
L
OWER
M
ONITOR
B
OWLER
T
ERMINAL
C
ONSOLE
I
NSTALLATION
The installation for the lower monitor bowler terminal is more difficult to perform. Figure
5 displays one way to position the bowler terminal in relation to the ball return. Install
the bowler terminal according to the following procedure:
Figure 5. Example Placement For Lower Monitor Bowler Terminal
1. Remove the four #10-24x3/4 phillips head sems screws (818-239-122) from the
bowler terminal back cover (286-002-026) and pull the back cover off slowly. Be
very careful not to extend the cables that are attached.
2. Remove the two #10-24x3/4 phillips head sems screws (818-239-122) from the
bowler terminal front cover assembly (286-002-040).
3. Remove and discard the four shipping bolts from the base of pedestal (286-002-
030).
4. Lift and remove the bowler terminal from the shipping container.
