Service
BOSS Scoring Bowler Terminal Consoles
Installation, Operation, Service, and Parts Manual
21
400-286-003 Rev. New
Figure 10. Monitor Assembly Replacement
3. Remove the two #10-24x3/4 phillips head sems screws (818-239-122) from the
bowler terminal front cover assembly (286-002-040) and pull the front cover away
from the bowler terminal pedestal (286-002-030).
4. Remove the four #8-32x1/2 phillips head sems screws (818-233-082) from the front
cover (286-002-027).
5. Disconnect intercom cable and the ground wire to remove front cover.
6. Remove the four screws from the inside front cover.
7. Remove 10 screws to remove keyboard bracket.
8. Place grounding tab underneath the bracket of the keyboard.
9. Place new monitor into the monitor bracket frame.
10. Replace 10 sems screws into keyboard bracket and align screws .
11. Replace front cover assembly (286-002-040) onto the bowler terminal.
12. Replace the two #10-24x3/4 phillips head sems screws (818-239-122) from the
bowler terminal front cover assembly (286-002-040).
