Installation
8
BOSS Scoring Bowler Terminal Consoles
Installation, Operation, Service, and Parts Manual
400-286-003 Rev. New
3. Install LCD mounting bracket (286-002-057) to the LCD display using four #4-4 pan
head phillips sems (817-921-032).
4. Attach and secure the 4-inch round speaker (770-064-240) to the front cover (286-
002-052) of the bowler terminal using four #6-32 x ¼ phillips pan head sems (818-
227-042).
5. Attach the LCD-to-BT board cable assembly (286-002-016) to the 4-inch round
speaker (770-064-240) on one end and attach the other end to the LCD final
assembly (286-002-053).
6. Set the switches on the bowler terminal board by using the switch configuration label
settings (286-001-074) located on the pedestal assembly (286-002-056). For proper
configuration, refer to the section called Switch Configuration Settings.
7. Vacuum and remove debris from around the bowler terminal area after performing
the LCD Display upgrade.
8. Turn power on and verify that everything is working correctly.
