Installation
BOSS Scoring Bowler Terminal Consoles
Installation, Operation, Service, and Parts Manual
7
400-286-003 Rev. New
!
S
TANDARD
B
OWLER
T
ERMINAL
C
ONSOLE
(
WITH
LCD D
ISPLAY
U
PGRADE
)
This section describes the procedures necessary to upgrade the standard bowler
terminal when the LCD Display feature has been purchased. You will be installing the
LCD-to-BT board cable assembly, a speaker, a LCD mount bracket and a LCD display
in this procedure. Figure 4 displays the necessary information to assist you in your
installation.
1. Verify that the power to the unit is turned OFF at the main circuit breaker.
2. Open front cover on bowler terminal and remove four #4-40 hex nuts (843-121-002)
and faston tabs (760-022-262) from keyboard plate (286-002-037).
Figure 4. Front Cover Of Bowler Terminal Exposing Parts To Be Installed
WARNING
Do NOT enter the bowler terminal until all power to the
unit is turned off at the main breaker box or serious injury
could result.
