Ametek sorensen hpd series, Руководство по эксплуатации

Страница: 38 / 41

38
Section 4. Operation
Using Multiple Supplies
Split Supply
Operation
Split supply operation uses two power supplies to obtain two positive voltages with
a common ground, or to obtain a positive-negative supply.
Two Positive Voltages To obtain two positive voltages, join the negative output
terminals of both supplies in a common connection as shown in Figure 4.4 . The
positive output terminals provide the required voltages with respect to the common
connection.
Figure 4.4 Split Supply Operation of Multiple Supplies (two positive voltages)
Positive-Negative Supply To obtain a positive-negative supply, connect the
negative output terminal of one supply to the positive terminal of the second supply
as shown in
Figure 4.5 . The positive output terminal of the first supply now provides
a positive voltage relative to the common connection. The negative output terminal
of the second supply provides the negative voltage. The current limits can be set
independently of each other. The maximum current available in split operation is
equal to the rated output of the supplies.
Operating Manual for HPD Series Power Supply
Postive Sense
Positive Output
Terminal
Negative Output
Terminal
Return Sense
Load Lines
Use the largest gauge and
shortest length possible
Power Supply 1
Postive Sense
Positive Output
Terminal
Negative Output
Terminal
Return Sense
Positive Load
Terminal #1
Postive Load
Terminal #2
Negative Load
Terminal
Load
Power Supply 2
26