manualshive.com logo in svg

Ametek AMEVision, Руководство пользователя, Страница: 38 / 85

Поделиться
Скачать
Ametek AMEVision Скачать руководство пользователя страница 38

PN 9000-165-VE, Rev P

12. 

If the sensor is configured for combustibles, inject the Combustibles 
Span Gas. 

You are then prompted to apply the combustibles span gas to the calibration 
gas inlet port of the sensor (tubing must be free of oil and dirt). Press 

ENTER/

MENU

 when you have applied this calibration gas.

 

The system will calibrate the combustibles span gas. Press 

ENTER/MENU

 

to accept the gas readings.

13. 

If the sensor is configured for methane, inject the Methane Span Gas.

 

You are then prompted to apply the methane span gas to the calibration 
gas inlet port of the sensor (tubing must be free of oil and dirt). Press  

ENTER/MENU

 when you have applied this calibration gas.

 

The system will calibrate the methane span gas. Press 

ENTER/MENU

 to 

accept the gas readings.

14.  When all gases have calibrated, the screen displays the 

Calibration Re-

sults

 that include 

% drift

 as well as recovery time. If the calibration is suc-

cessful, a large GREEN check mark will be displayed. If it is not, a large RED 
‘X’ is displayed.

Figure 2-14.2. 

Calibration Results screen, 

Failed calibration.

Figure 2-14.1.  

Calibration Results screen, 

Successful calibration.

2-20  |  Thermox

®

 AMEVision Display User Interface

Содержание AMEVision






















































































Отзывы:

Нет отзывов