manualshive.com logo in svg

Ametek AMEVision, Руководство пользователя, Страница: 16 / 85

Поделиться
Скачать
Ametek AMEVision Скачать руководство пользователя страница 16

PN 9000-165-VE, Rev P

EMC Grounding, Shielding, and Noise Protection

For EMC purposes, under no circumstances should you leave cable 
shields disconnected at one end or both ends of the cable (sensor or 
control unit or other device).

You must use twisted-pair cable in rigid metal conduit or use twisted pair cable 
with an overall braided shield. All cable shields or conduits connecting to the 
control unit must be chassis grounded.

EMC Grounding Method

• 

Shield Ring Method 

 

Connect all shields for that conduit entry (other than power) to a supplied 
shield terminal ring (see Figure 1-2). This shield ring is a stainless steel ring 
with a metal tab. Place the shield ring under the conduit nut. Crimp the 
shields from all cables for that conduit entry to a 1/4" female quick discon-
nect, then push it onto the tab that sticks out of the conduit shield ring. 
Keep shields as short as possible.

• 

Ground Stud Method  

Connect all cable shields for that conduit entry to the grounding stud  
closest to that conduit entry hole.

Figure 1-2. 

Direct shield grounding 

methods.

SHIELD RING METHOD

GROUND STUD METHOD

Shield Terminal Ring

Conduit Housing

Cable Shield(s)

Max. Length 1 inch

Conduit Nut

Quick Disconnet (1/4”)

Capacitor

Conduit Nut

Cable Shield(s)

Max. Length 2 inches

Nut

Washer

Ring Terminal 

Conduit Housing

Capacitor

1-4  |  Thermox

®

 AMEVision Display User Interface

Содержание AMEVision






















































































Отзывы:

Нет отзывов