Ametek Land Landmark Graphic AE Скачать руководство пользователя

Страница: 83 / 84

PRODUCT WARRANTY

Thank you for purchasing your new product from Land Instruments International. This Land

manufacturer’s ‘back-to-base’ warranty covers product malfunctions arising from defects in design

or manufacture. The warranty period commences on the instrument despatch date from the Land

Instruments International Ltd. factory in Dronﬁ eld, UK.

36 MONTHS WARRANTY

Building upon the reputation for reliability and longevity that System 4 and UNO thermometers

have earned, Land are delighted to be able to provide our customers with an industry-leading

36 month warranty for the following products:-

• SPOT thermometers, accessories and mountings and special instruments based on SPOT.
• System 4 thermometers, processors, accessories and mountings and special instruments

based on System 4.

•

UNO thermometers, accessories and mountings and special instruments based on UNO.

•

Application-dedicated processors based on LANDMARK

Graphic.

•

ABTS/S and ABTS/U

• FTS
•

VDT/S and VDT/U

• DTT
• FLT5/A

This 36 month warranty is provided as standard for all orders for the products listed above received from

1st May 2002.
We believe that our customers expect us to set the standard in terms of performance, quality, reliability and

value for money. This 36 months warranty, as a part of an on-going program of continuous improvement,

is just one way in which Land strive to maintain our position as the temperature measurement partner of

choice.

24 MONTHS WARRANTY

The following Land Instruments International products are provided with a 24 months warranty:

•

ARC

• FTI-E
•

NIR

12 MONTHS WARRANTY

All Land Instruments International products not provided with either a 36 month or 24 month warranty (see

lists above), are provided with a 12 months warranty.

Содержание Landmark Graphic AE




















































































Результаты поиска

Содержание Landmark Graphic AE

Отзывы:

Похожие инструкции для Landmark Graphic AE

Бренды по названию

Популярные бренды

Ametek Land Landmark Graphic AE, Руководство пользователя

Результаты поиска

Содержание Landmark Graphic AE

Отзывы:

Похожие инструкции для Landmark Graphic AE

Бренды по названию

Популярные бренды