American TIM-900, Инструкция по установке и эксплуатации

Страница: 3 / 40

• The instructions provided by this manual satisfy both the Installer's and
the Users' requirements (Manager and Operators) of the TIM-900.
In the Table of Contents a symbol alongside each paragraph indicates the
person this information is intended for.
All paragraphs marked with this symbol concern the
Operator. The operator is the person who uses the TIM-900
to carry out dispensing operations. Therefore the Operator is
not expected to read paragraphs other than those marked
with this symbol.
All paragraphs marked with this symbol concern the
Manager. The TIM-900 offers several options (selection of the
Unit of Measurement, selection of the Number of Decimal
Digits, Calibration, etc.). At least one skilled Operator
(hereinafter referred to as the Manager) must know this data
in order to allow the Operators to use the METER correctly.
The Manager must read thoroughly all paragraphs
concerning the Manager and the Operator.
• The following symbols are used to highlight important notes and information:
Warning
Warning
This symbol highlights important aspects as to the
CORRECT USE of the TIM-900.
This symbol highlights important aspects as to
SAFETY.
This symbol highlights important aspects as to avoid
POLLUTION HAZARDS.
Warning
All paragraphs marked with this symbol concern the Installer
only. He is responsible for installing the TIM-900 and is
required to read the manual thoroughly, no paragraph
omitted.
E
ng
lis
h
Using the manual
C
Operator
Manager
Installer
3