American TIM-900, Инструкция по установке и эксплуатации

Страница: 25 / 40

Press AUTO to go to the next
Unit of Measurement.
The TIM-900 allows the user to select
the number of Decimal Digits by
displaying the HUNDREDTH (two
decimal digits) or the THOUSANDTH
(three decimal digits) of the selected
Unit.
Press AUTO to modify the
selection.
The TIM-900 displays:
Press AUTO again to go back to the
previous selection.
The above mentioned Units of
Measurement refer to the Batch
total indication.
• If you select the unit LITERS,
the
TOTALS will be displayed in
LITERS.
• If you select the unit GALLONS,
PINTS or QUARTS,
the TOTALS
will be displayed in GALLONS .
Go on pressing AUTO until
the desired Unit of
Measurement is displayed.
Press and hold down
the AUTO key to go to
the next activity.
Press RESET to exit
from the
customization menù.
The TIM-900 allows the user to select
one of the following Units of
Measurement:
Warning
Warning
• The modification of the Unit of
Measurement does NOT require a
new Calibration (see paragraph
G7).
• If the TOTAL indicates a value
other than zero, this value is
automatically converted from
LITERS into GALLONS or
vice-versa, if necessary, when the
Measurement Unit is being
modified.
E
ng
lis
h
Units of Measurements
G3
• QTS = QUARTS
• PTS = PINTS
• LIT = LITERS
• GAL = GALLONS (U.S. Gallons)
When the TIM-900 displays:
Blinking
Blinking point
The TIM-900 displays:
Blinking point
Decimal digits
G4
25