American Standard VorMax Plus 708AA Series, Руководство пользователя

Страница: 4 / 24

Flip the bowl upside down and press the wax ring down firmly.
1
Align the bowl and bolt
holes to set into place.
Apply weight evenly.
Do not move after
placement as water
tight seal may break.
TIP: Place a piece of masking
tape on the floor next to the
bolts on both sides to help
with alignment.
Install T-Bolts onto the flange
and screw the retaining nuts
to hold into place.
3
4
2
!
BOLT CAP
BOWL-TO-FLOOR
KNOBS
pg
4
Hand tighten only.
Do not overtighten.
Installation Instructions:
Recommended fitting type for
back-to-back installations.
D epending upon your plumbing and venting conditions, the flow from
this toilet in a back-to-back installation may create a vacuum on the
system and draw water from the opposing bowl. The National
Standards Plumbing Code prohibits the use of a cross fitting for
drainage as throw over is possible. The code does approve a
directional "Y" style fitting with proper venting to direct the water
downward and away from the other toilet.
BACK-TO-BACK INSTALLATION
!
CAUTION
:
IF A VORMAX PLUS FRESHINFUSER IS NOT SECURELY INSERTED INTO THE SPUD OPENING,
DO
NOT FLUSH THE TOILET
AS THIS MAY RESULT IN WATER LEAKING FROM THE TOILET. TOILET MUST HAVE A
VORMAX PLUS FRESHINFUSER INSERTED IN THE SPUD OPENING AT ALL TIMES WHEN FLUSHING THE TOILET.
For further assistance please call Customer Care at: (800) 442-1902