PROGRAMMING A SALVO
To select a System Salvo for programming:
1. Position cursor to the SALVO number line in the SET
SYSTEM SALVOS menu.
2. Enter the desired salvo number (1 - 64).
3. Press the ACK key.
See page 4-3 for cursor movement instructions.
CAM (Camera)
To add or change a camera in a salvo:
1. Move the cursor to the appropriate CAM column and
camera position entry.
2. Enter the desired camera number.
3. Press the ACK key. The selected camera number will
appear under the CAM heading.
Note: To eliminate a particular camera from a salvo, press the
ACK key.
PRE (Preset)
If presets are required for a camera:
1. Position the cursor to the PRE column and desired camera
position entry.
2. Enter the preset number (1 - 72) to call for this camera.
Zero represents no preset call for this entry.
3. Press the ACK key. The preset number will appear under
the PRE heading.
AUX (Auxiliary)
If an auxiliary is associated with an entry:
1. Move the cursor to the AUX column and desired camera
position entry.
2. Press the ACK key to cycle through the available
auxiliaries options and press the NEXT key to accept the
displayed selection.
or
Enter one of the following auxiliary action numbers and
press the ACK key. The auxiliary selection will appear in
the AUX column.
1 = 1 ON
5 = 1 OFF
2 = 2 ON
6 = 2 OFF
3 = 3 ON
7 = 3 OFF
4 = 4 ON
8 = 0 -
CN (Connect Next)
To include the next camera, or another System Salvo:
1. Position the cursor to the CN column and the desired
camera POS number.
2. Press the ACK key to cycle through the CN selections. The
entry for CN displays “Y”, “N”, or “S” each time the ACK
key is pressed. Press the NEXT key to accept the displayed
selection.
or
Enter one of the following numbers and press the ACK key.
The selection will display in the CN column entry.
1 = N, no connect next
2 = Y, connect to the next entry
3 = S, call a System Salvo
All entries in a System Salvo should have the CN entry set to
Y except the last entry, which is set to N or S.
Notes: If a System Salvo is selected (S), the CAM number for
this entry must be set to the desired Salvo number.
If Pseudo numbers are used, the CAM number switches
between Pseudo numbers when N or Y is selected and
Real numbers when S is selected.
Example: Set Salvo number 1, position 5 to Camera number
17, Preset number 5, Auxiliary 3 ON, and Connect Next to
the next camera (position 6). Position 6 is the last camera
(camera number 18) in this salvo.
S E T S Y S T E M S A LV O S
S A LV O -
0 1
P O S
C A M
P R E
A U X
C N
1
0 0 0 1
0 0
0 -
Y
2
0 0 0 2
0 2
2 O N
Y
3
0 0 0 3
0 3
3 O N
Y
4
0 0 0 4
0 4
4 O N
Y
5
0 0 1 7
0 5
3 O N
Y
6
0 0 1 8
0 0
0 -
N
.
.
1 6
0 0 1 6
0 0
0 -
N
P R E V I O U S M E N U
4-9
1996R MENU PROGRAMMING