MENU PROGRAMMING
All the features of the 1996R are programmable through on-
screen menus. The menus are displayed via a separate video
output, labeled PROG MON, on the rear of the 1996R CPU.
This video output may be connected to a separate monitor, or
connect back into the video switching system for display on
any system monitor. Until the menu system is started, this
output displays the following message on a blank screen.
ENTER CODE TO ACCESS MENUS
Access to menu programming is possible only from a 1678CM
or 2078 keyboard.
Note: As a security feature these keyboards have a keyswitch
which disables all setup functions when set to OFF.
To enter the main menu using a 1678CM Series keyboard:
1. Turn the keyswitch to the Program (horizontal) position.
2. Enter 129 on the keypad.
3. Press the PROG button on the keyboard.
To enter the main menu using a 2078 Series keyboard:
• Place the 2078 keyswitch in the DISP position.
MAIN SELECTION MENU
The Main Selection menu is then displayed via the PROG
MON output, indicating the setup functions available.
To select a Main Selection menu function:
1. Move the cursor to the desired line.
or
Enter the number (1 - 6) for the desired line.
2. Press the ACK button to access that selection.
Each selection of the Main Selection menu brings up another
menu, as illustrated at the bottom of this page. Refer to the
following pages for each menu procedures.
SYSTEM
pages 4-3 to 4-15
MONITOR
pages 4-16 to 4-17
CAMERA
pages 4-18 to 4-19
PORTS
pages 4-20 to 4-21
ACCESS
pages 4-22 to 4-26
PRIORITY
pages 4-27 to 4-29
In each of these menus (shown below), move the cursor to the
RETURN MAIN line and press the ACK key to return to the
MAIN SELECTION menu.
The System, Camera, Access, and Priority menus each provide
additional menus for selection.
To select an entry from any of these menus:
1. Move the cursor to the desired line.
or
Enter the number for the desired line.
2. Press the ACK button to access that selection.
When menu programming is completed, the user can exit from
the menu system from any menu displayed.
To exit the menu system from a 1678CM Series keyboard:
1. Enter 130 on the keypad.
2. Press the PROG button on the keyboard.
To exit the menu system from a 2078 Series keyboard:
• Place the 2078 keyswitch in the OFF or PROG position.
4-2
MAIN SELECTION
- - - - - - - - - - - - - -
1 SYSTEM
2 MONITOR
3 CAMERA
4 PORTS
5 ACCESS
6 PRIORITY
SYSTEM
MONITOR
CAMERA
PORT
ACCESS
PRIORITY
1 SET TIME AND DATE
ARM TYPE ACK
1 PSEUDO
BAUD
1 KEYBOARD/MONITOR
1 USER IDENTIFICATION
2 SET SYSTEM TOURS
TOUR
2 TITLE
DATA BITS
2 KEYBOARD/CAMERA VIEW
2 SET KEYBOARD/USER
3 SET SYSTEM SALVOS
TIME DATE
RETURN MAIN
PARITY
3 KEYBOARD/CAMERA CONTROL 3 SET PRIORITY
4 SET EVENT TIMERS
TITLE DISPLAY
STOP BITS
4 MONITOR/CAMERA ACCESS
RETURN MAIN
5 SET ALARM CONTACTS
CAM TITLE LCK
PORT USE
5 MONITOR/CONTACT ACCESS
6 MONITOR STATUS
MON TITLE LCK
RETURN MAIN
RETURN MAIN
RETURN MAIN
DISPLAY STATUS
RETURN MAIN