Cursor Positioning/Paging
The following cursor instructions apply to all menus.
To position the cursor to a desired location on the menu:
• Use the joystick to move the cursor to the desired selection.
or
• Press the NEXT button until the cursor is placed at the
desired selection.
or
• On the 2078 keyboard, use the arrow direction keys (in the
FOCUS and ZOOM sections of the keyboard) to move the
cursor to the desired selection.
To change pages in a multi-page menu:
Using 1678CM Keyboards:
• To move vertically through the pages (rows), press the OFF
or ARM button in the CAMERA section of the keyboard.
• To change directly to a page for a specific row/entry:
1. Enter the desired row/entry number on the keypad.
2. Press either the CAMERA OFF or ARM button.
• To move horizontally through the pages (columns), press
the OFF or ARM button in the MONITOR section of the
keyboard.
• To change directly to a page for a specific column/heading:
1. Enter the desired column/heading number on the
keypad.
2. Press either the MONITOR OFF or ARM button.
Using 2078 Keyboards:
• To move vertically through the pages (rows), press the
PAGE up/down buttons in the IRIS section of the keyboard.
• To change directly to a page for a specific row/entry:
1. Enter the desired row/entry number on the keypad.
2. Press either (IRIS) PAGE up/down button.
• To move horizontally through the pages (columns), press
the OFF or ARM button in the MONITOR section of the
keyboard.
• To change directly to a page for a specific column/heading:
1. Enter the desired column/heading number on the
keypad.
2. Press either the MONITOR OFF or ARM button.
SYSTEM
The System menu provide the means to define the system
Time and Date, System Tours, System Salvos, Event Timers,
and Alarm Contacts. The Monitor Status line of this menu
brings up a status screen for reviewing the current status of all
system monitors.
To select an entry from the System menu:
1. Move the cursor to the desired line.
or
Enter the number (1 - 6) for the desired line.
2. Press the ACK button to access that selection.
Each selection of the System menu brings up another menu.
Refer to the following pages for the specific menu procedures.
SET TIME AND DATE
page 4-4
SET SYSTEM TOURS
page 4-5
SET SYSTEM SALVOS
page 4-8
SET EVENT TIMERS
page 4-10
SET ALARM CONTACTS
page 4-12
MONITOR STATUS
page 4-15
The PREVIOUS MENU line of each of these menus returns to
the System menu for further selections.
The RETURN MAIN line of the System menu returns to the
Main Selection menu, page 4-2.
4-3
1996R MENU PROGRAMMING
S Y S T E M
1 S E T T I M E A N D D AT E
2 S E T S Y S T E M T O U R S
3 S E T S Y S T E M S A LV O S
4 S E T E V E N T T I M E R S
5 S E T A L A R M C O N TA C T S
6 M O N I T O R S TAT U S
R E T U R N M A I N