PRE (Preset)
If presets are required for a tour entry:
1. Move the cursor to the PRE column and desired entry line.
2. Enter the preset number (from 1 to 72). Zero represents no
preset call for this entry.
3. Press the ACK key. The preset number will appear under
the PRE heading.
Example:
S E T S Y S T E M T O U R S
T O U R - 0 1
E N T
C A M
D W L
P R E
A U X
C N
0 1
0 0 0 1
0 2
0 1
1 O N
N
0 2
0 0 0 2
0 2
0 2
2 O N
N
0 3
0 0 0 3
0 2
0 3
3 O N
N
0 4
0 0 0 4
0 2
0 4
4 O N
N
0 5
0 0 0 5
0 2
0 5
1 O F F
N
0 6
0 0 0 6
0 2
0 6
2 O F F
N
0 7
0 0 0 7
0 2
0 7
3 O F F
N
0 8
0 0 0 8
0 2
0 8
0 -
N
.
1 6
0 0 1 6
0 2
0 1
1 O N
N
P R E V I O U S M E N U
AUX (Auxiliary)
If an auxiliary is required for a tour entry:
1. Move the cursor to the AUX column and desired entry line.
2. Press the ACK key while in the AUX column to cycle
through the available auxiliaries options. Press the NEXT
key to accept the displayed selection.
or
Enter one of the following numbers and press the ACK key.
The selection is displayed in the AUX column.
1 = 1 ON
5 = 1 OFF
2 = 2 ON
6 = 2 OFF
3 = 3 ON
7 = 3 OFF
4 = 4 ON
8 = 0 -
Example:
S E T S Y S T E M T O U R S
T O U R - 0 1
E N T
C A M
D W L
P R E
A U X
C N
0 1
0 0 0 1
0 2
0 1
1 O N
N
0 2
0 0 0 2
0 2
0 2
2 O N
N
0 3
0 0 0 3
0 2
0 3
3 O N
N
0 4
0 0 0 4
0 2
0 4
4 O N
N
0 5
0 0 0 5
0 2
0 5
1 O F F
N
0 6
0 0 0 6
0 2
0 6
2 O F F
N
0 7
0 0 0 7
0 2
0 7
3 O F F
N
0 8
0 0 0 8
0 2
0 8
0
N
.
1 6
0 0 1 6
0 2
0 1
1 O N
N
P R E V I O U S M E N U
CN (Connect Next)
If a salvo or tour switching is desired at a tour entry:
1. Move the cursor to the CN column and desired entry line.
2. Press the ACK key to cycle through the CN selections. The
entry for CN displays “N”, “Y”, “S”, or “T” each time the
ACK key is pressed. Press the NEXT key to accept the
displayed selection.
or
Enter one of the following numbers and press the ACK key.
The selection will display in the CN column entry.
1 = N, no connect next
2 = Y, connect to the next entry
3 = S, call a System Salvo
4 = T, call another System Tour
If Connect Next (Y) is selected, the dwell times for each salvo
group is controlled by the first entry of the group. The dwell
time for all but the first entry in the salvo group may be left
blank. All entries in a connect next sequence should have the
CN entry set to Y except the last entry, which is set to N.
If a System Salvo is selected (S), the CAM number for this
entry line must be set to the desired Salvo number.
If another System Tour is selected (T), the CAM number for
this entry line must be set to the desired Tour number. A
System Tour cannot call itself.
Notes: When a tour calls another System Tour, the sequence
does not automatically return to the original tour unless
specified by a CN in the tour being called.
When a tour is operating in the reverse direction, the
tour linking may not operate as expected. The tour
being called starts operation in reverse, at the last step
of that tour. Thus if the tour being called also has a CN
link to another System Tour, that link is executed first,
and the rest of that tour is not run.
If Pseudo numbers are used, the Camera (CAM) field
switches between Pseudo numbers when N or Y is
selected and Real numbers when S or T is selected.
4-7
1996R MENU PROGRAMMING