American Dynamics ADC860, Инструкция по эксплуатации

Страница: 13 / 92

ENGLISH
12
MANUAL adjustment screen
1. Adjustment screen appears when press-
ing the SET button on the “MANUAL”
mode.
2. Adjust with or button.
button is used for adjustment to red
(magenta, whe is moved to R
(Mg).
button is used for adjustment to blue
(green), whe is moved to B (G).
3. Switching between R/B and Mg/G can be
performed with or button.
Note:
In AUTO mode, the optimum white balance may not be ob-
tained when the light source has a color temperature outside
the adjustment range.
In such a case, set W.BAL to the MANUAL mode.
䡵
HLI [Highlight inverter]
The HLI function inverts the highlight part
of picture so that the parts around it can
be seen more clearly.
Variable values
: OFF, ON(1), ON(2), ON(3)
Initial set : OFF
ON is adjustable in three degrees. The smaller
the number, the brighter the area to be re-
versed.
– – MOD E S E L E C T – –
I D O F F
A GC G A I N 1 8 d B
S U P E R A GC O F F
S H U T T E R MA N U ( )
B L C O F F
A v : P k 8 : 2
W . B A L A U T O
> H L I O F F
E N D
<How to set HLI>
1. Press or button, and OFF is changed to ON (1)to enter
the HLI mode.
2. Press SET button to remove ( ), and ON1is displayed to allow
on-screen selection.
3. Monitoring the screen, select one of ON1,ON2 and ON3 with
or button.
4. Press SET button again, and ( ) comes out to finish setting.
䡵
To clear the setup functions
Note:
ID (camera title) is not cleared with CLEAR.
3. Press SET button to set the END mode, resuming the initial
setting screen.
– – C AME R A S E T U P – –
G E N L OC K
V I D E O A D J U S T
MOD E S E L E C T
> E N D MEMOR Y
1. Move the cursor “>” to END.
2. Select END mode with
or button.
MEMORY : Set value holds.
CLEAR
: All the set values resume the
values.
> R : – – – – – – – – – – + – – – – – – – : B
M g : – – – – – – – – – – – – – + – – – – : G
E N D