![background image](http://html1.mh-extra.com/html/american-dj/illusion-dotz-4-4/illusion-dotz-4-4_user-instructions_2923004009.webp)
ADJ Products, LLC - www.adj.com - Illusion Dotz 4.4 Instruction Manual Page 16
ADJ Products, LLC - www.adj.com - Illusion Dotz 4.4 Instruction Manual Page 17
2. Press the UP or DOWN buttons until
“Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until
“Tilt Invert” is displayed, and
press ENTER.
4. Either “Off” or “On”
will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
PAN DEGREE
- With this function you can change the pan degree
from 630 to 540.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Function”
is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until
“Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until
“Pan Degree” is displayed, and
press ENTER.
4. Either “540” or “630”
will be displayed, use the UP and DOWN
buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
FEEDBACK
- With this function you can feedback switch the pan
movement or tilt movement.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Function”
is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until
“Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until
“Feedback” is displayed, and
press ENTER.
4. Either “Off” or “On”
will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
MOVEMENT SPEED
- With this function you can set the pan and tilt
Illusion Dotz 4.4
System Menu
movement speed.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Function”
is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until
“Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until
“Move Speed” is displayed,
and press ENTER.
4. Either “Speed 1”, “Speed 2”, “Speed 3” or “Speed 4”
will be dis-
played, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
MIC SENS
- With this function you can set the microphone sensitiv-
ity. The default setting is 70%. You can adjust the sensitivity between
0%-99%
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Function”
is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until
“Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until
“Mic Sensitivity” is displayed,
and press ENTER.
4. Use the UP and DOWN buttons to adjust the mic sensitivity
between 0%-99%.
5. Press ENTER to confirm your selection or press MODE to exit.
STAND BY
- With this function the LEDs and step motors will power
off if there is no DMX signal within 15 mins (factory defualt). Once it
receives a DMX signal, the fixture will reset itself.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Function”
is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until
“Status” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until
“Stand By” is displayed, and
press ENTER.
Illusion Dotz 4.4
System Menu