manualshive.com logo in svg
background image

ADJ Products, LLC  -  www.adj.com  - Illusion Dotz 4.4 Instruction Manual Page 7

The Illusion Dotz 4.4 is fully operational in two different mounting 

positions, hanging upside-down from a ceiling or set on a flat level 

surface. To avoid internal damage to the unit, never mount the unit on 

its side. Be sure this fixture is kept at least 0.5m away from any flam-

mable materials (decoration etc.). Always use and install the supplied 

safety cable as a safety measure to prevent accidental damage and/

or injury in the event the clamp fails (see next page). Never use the 

carrying handles for secondary attachment.

  Illusion Dotz 4.4                                                  Mounting

When installing the unit, the trussing or area of installation must be 

able to hold 10 times the weight without any deformation. When 

installing the unit must be secured with a secondary safety attach-

ment, e.g. and appropriate safety cable. Never stand directly below 

the unit when mounting, removing, or servicing the unit. 
Overhead mounting requires extensive experience, including calculat-

ing working load limits, installation material being used, and perodic 

safety inspection of all installation material and unit. If you lack these 

qualifications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.

ADJ Products, LLC  -  www.adj.com  - Illusion Dotz 4.4 Instruction Manual Page 6

The Illusion Dotz 4.4

 carries a 

two year limited warranty. Please fill out 

the  enclosed  warranty card to validate your  purchase.  All  returned 

service  items  whether  under  warranty  or  not,  must  be  freight  pre-

paid and accompany a return authorization (R.A.) number. The R.A. 

number must be clearly written on the outside of the return package. 

A brief description of the problem as well as the R.A. number must 

also be written down on a piece of paper 

and 

included in the shipping 

carton. If the unit is under warranty, you must provide a copy of your 

proof of purchase invoice. You may obtain a R.A. number by con-

tacting our customer support team on our toll free customer support 

number. All packages returned to the service department not display-

ing a R.A. number on the outside of the package will be returned to 

the shipper at the shippers cost.

  Illusion Dotz 4.4   

                    Product Registration

To optimize the performance of this product, please read these operating 

instructions carefully to familiarize yourself with the basic operations of 

this unit. These instructions contain important safety information regard-

ing the use and maintenance of this unit. Please keep this manual with 

the unit, for future reference.

  Illusion Dotz 4.4   

                     General Instructions

Caution!

 There are no user serviceable parts inside this unit. Do not 

attempt  any  repairs  yourself,  doing  so  will  void  your  manufactures 

warranty.  In  the  unlikely  event  your  unit  may  require  service  please 

contact ADJ Products, LLC.

During operation the housing may become extremely hot. Avoid 

touching the unit with bare hands while in use.
ADJ Products, LLC will not accept any liability for any resulting dam-

ages caused by the non-observance of this manual or any unauthor-

ized modification to this unit.

  Illusion Dotz 4.4                              Handling Precautions

Содержание Illusion Dotz 4.4



























Отзывы: