![background image](http://html1.mh-extra.com/html/american-dj/illusion-dotz-4-4/illusion-dotz-4-4_user-instructions_2923004013.webp)
ADJ Products, LLC - www.adj.com - Illusion Dotz 4.4 Instruction Manual Page 24
ADJ Products, LLC - www.adj.com - Illusion Dotz 4.4 Instruction Manual Page 25
Illusion Dotz 4.4
System Menu
that “
Function
” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “
DMX Value
” is displayed,
and press ENTER.
3. A DMX Channel will be displayed.
Example:
Prism, Color Wheel,
Gobo Wheel, etc... Press ENTER when you find the DMX channel that
you would like to check. When you press ENTER the DMX value of
that channel will displayed.
4. Press the MODE button to exit.
SLAVE SET -
This function lets you designate the unit as the slave in
a Master-Slave configuration.
1. Access the main menu, and press the UP or DOWN buttons so
that “
Function
” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “
Slave Set
” is displayed, and
press ENTER.
3. Either Slave 1, Slave 2, or Slave 3 will be displayed. Press ENTER
to select either of the three, or press MODE button to exit.
AUTO PROGRAM -
This function allows the internal programs to
run in either stand-alone or master/slave mode. In “Master” mode
the fixture will send DMX data to other fixtures connect via the DMX
chain. In “Alone” mode the fixture will operate as a single fixture. The
program for this mode is selected in the “Select program” section of
the control menu. You can set the number of steps under “Edit pro-
gram”. You can edit the individual scenes under “Edit scenes”. With
this function, you can run the individual scenes either automatically,
i.e. with the adjusted Step-Time.
1. Access the main menu, and press the UP or DOWN buttons so
that “
Function
” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “
Auto Program
” is displayed,
and press ENTER.
3. Either “Master” or “Alone” will be displayed.
4. Press ENTER to to make your selection, or press MODE button to
exit.
Illusion Dotz 4.4
System Menu
SOUND CONTROL -
With this function, the internal program will run
in sound active mode.
1. Access the main menu, and press the UP or DOWN buttons so
that “
Function
” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “
Sound Control
” is dis-
played, press ENTER.
3. Either “Master” or “Alone” will be displayed. Use the UP or DOWN
buttons to change the operating mode.
4. Press ENTER to to make your selection, or press MODE button to
exit.
DEFAULT RESET -
1. Access the main menu, and press the UP or DOWN buttons so
that “
Function
” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until
“DFSE” is displayed, press
ENTER.
3. Either
“Off” or “On”
will be displayed, use the UP and DOWN but-
tons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to
exit.
INFORMATION
Time Information (Time information is always represented in
hours)
CURRENT RUNNING TIME -
This will allow you to check the units
current running time.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that
“Information” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until
“Time Information” is dis
-
played, press ENTER.
3. Press UP or DOWN buttons, until
“Current” is displayed, and
press ENTER.