![background image](http://html1.mh-extra.com/html/american-dj/illusion-dotz-4-4/illusion-dotz-4-4_user-instructions_2923004012.webp)
ADJ Products, LLC - www.adj.com - Illusion Dotz 4.4 Instruction Manual Page 23
ADJ Products, LLC - www.adj.com - Illusion Dotz 4.4 Instruction Manual Page 22
Illusion Dotz 4.4
System Menu
3. Press UP or DOWN buttons, until
“Flip Display” is displayed, and
press ENTER.
4. Either “Off” or “On”
will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
KEY LOCK
- With this function activated the buttons will lock autom-
matically after 15 seconds.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Function”
is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until
“LCD Set” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until
“Key Lock” is displayed, and
press ENTER.
4. Either “Off” or “On”
will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
DISPFLASH
- With this function activated the the display will flash
when there is not DMX signal.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Function”
is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until
“LCD Set” is displayed, press
ENTER.
3. Press UP or DOWN buttons, until
“DispFlash” is displayed, and
press ENTER.
4. Either “Off” or “On”
will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
Dimmer Curve
DIM CURVE
- Select 1 of 5 dimming curves. See page 45 for the
dimming curve chart.
Illusion Dotz 4.4
System Menu
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Function”
is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until
“Dim Curve” is displayed,
press ENTER.
3. Either
“Standard”, “Stage”, “TV”
, “
Architectural
”, or
“Theater”
will be displayed, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE to exit.
Temp. C/F
TEMP. C/F -
With this function, you can change the temperature dis-
play to show either Celsius or Fahrenheit.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Function”
is highlighted, then press ENTER.
2. Press UP or DOWN buttons, until
“Temp. C/F” is displayed, and
press ENTER.
3. Either
“Celsius” or “Fahrenheit”
will be displayed, use the UP and
DOWN buttons to toggle between.
4. Press ENTER to confirm your selection or press MODE to exit.
Init. Effect
INIT. EFFECT -
In this menu you are able to check initial effect posi-
tion.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that
“Function”
is highlighted, then press ENTER.
2. Press UP or DOWN buttons, until
“Init. Effect” is displayed, and
press ENTER.
3. “XXX” will be displayed. “XXX” represents the current effect posi-
tion.
4. Press ENTER or press MODE to exit.
CHANNEL VALUE -
This function will allow you to see the DMX
value of each DMX channel that is currently being used at the time.
1. Access the main menu, and press the UP or DOWN buttons so