American DJ Illusion Dotz 4.4, Инструкция пользователя

Страница: 15 / 26

ADJ Products, LLC - www.adj.com - Illusion Dotz 4.4 Instruction Manual Page 28 ADJ Products, LLC - www.adj.com - Illusion Dotz 4.4 Instruction Manual Page 29
Illusion Dotz 4.4 System Menu
ERROR INFO - In this menu you are able to reset the error message.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that “Information” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until
“Error Info” is displayed,
press ENTER.
3. Use the UP or DOWN buttons to find the error message that needs
to be cleared.
4. Press ENTER or press MODE to exit.
MODEL INFO - In this menu you are able to see the lamps model
information.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that “Information” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until
“Model Info” is displayed,
press ENTER.
3.
“XXXX” will now be displayed. “XXXX” represents the model infor -
mation.
4. Press MODE to exit.
SOFTWARE VERSION - This will allow you to see the software ver-
sion of each IC.
1. Press the MODE button to access the main menu. Press the UP
or DOWN buttons so that “Information” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until
“Software Version” is dis -
played, press ENTER.
3. Use the UP or DOWN buttons to scroll through each IC and see
the software version.
4. Press MODE to exit.
Illusion Dotz 4.4 System Menu
TEST
RESET MOTORS
- With this function you can reset the Pan & Tilt
motors.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Test” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Reset Motor” is displayed,
press ENTER.
3. Press ENTER to reset or press MODE to exit.
TEST CHANNEL - With this function you can test/correct each chan-
nel function.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Test” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Test Channel” is displayed,
press ENTER.
3. Use the UP or DOWN buttons to scroll through the various chan-
nels.
4. Press ENTER or press MODE to exit.
PANEL CTRL. - With this function you can easily adjust the lamp. All
effects will be canceled, the shutter will open and output intensity will
be 100%. With the individual functions you can focus the light on flat
surface (a wall) and finely adjust the lamp.
1. Press the MODE button to access the main menu. Press the UP or
DOWN buttons so that “Test” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Panel Ctrl.” is displayed,
press ENTER.
3. Use the UP or DOWN buttons to scroll through the various func-
tions. Press ENTER when you find the function you would like to
adjust.
4. Press ENTER or press MODE to exit.
CALIBRATION - With this function you can calibrate and adjust the
effects wheels to their correct positions. The Calibration password