©American Audio® - www.americanaudio.eu Versadeck™ User Manual Page 29
applied to a channel signal, turning the knob in a clockwise direction will increase the
amount of bass applied to a channel signal.
(28) Master Volume Level Indicators
– The dual
Master Level LED Indicators
are used to
detail the master output level. The meters will detail the output level of both the left and
right channels.
(29) Channel Fader
– These faders are used to control the output signal of any source
assigned to its particular channel.
(30) Crossfader Curve Adjustment
– The 3 position switch changes the behavior of the
crossfader action by changing the crossover curve slope. The 3 settings from left to right are:
Quick Fade
,
Short Fade
, and
Normal Fade
. (
Quick Fade
is usually used for scratching).
(31) Faderstart ON/OFF Switch
– With this function you can use the crossfader to start and
stop playback. The
ON/OFF Faderstart Switch
activates the fader start feature. When the
fader start feature is activated, sliding the
Crossfader (32)
from left to right will play or cue
the player.
Example
: Be sure the
Faderstart
feature is activated on both channels. Slide the
crossfader to the channel 1 position (full left) and begin playback on Player 1. Slide the
crossfader to the channel 2 position (far right). This will immediately trigger the play function
on Player 2 and return Player 1 to cue mode. To return to normal fader operation, turn the
Faderstart ON/OFF Switch
to the
Off
position.
(32) Replaceable Crossfader
– This fader is used to blend the output signals of channels 1
and 2 together. When the fader is in the full left position (channel 1), the output signal of
channel 1 will be controlled by the master volume level. The same fundamentals will apply
for channel 2. Sliding the fader from one position to another will vary the output signals of
channels 1 and 2 respectively. When the crossfader is set in the center position, the output
signals of both the channels one and channels two will be even.
(33) Master Indicator Button
– This button is used to choose between master level
indicators and channel level indicators.
(34) Relay Button
– This button activates the
Relay
function.
(35) Booth Level
– This knob is used to adjust the monitor volume output level. Turn the
knob in a clockwise direction to increase the monitor volume.
(36) Master Volume Control
– This rotary knob is used to control the master output level
(volume). To avoid distorted output, try to maintain an average output signal level +4 dB. Be
sure this volume control is always set to zero before turning the unit on.
