©American Audio® - www.americanaudio.eu Versadeck™ User Manual Page 35
11.
I
NTERNAL
M
ENU
Press the
Folder Knob (1)
for at least 3 seconds to enter the internal menu. Turn the
Folder
Knob (1)
to scroll through the different submenus. Turn either the
Track Knob (21)
or
Jog
Wheel (16)
to change the submenu settings.
To save and exit the internal menu, turn the
Folder Knob (1)
until
G. Exit & Save
is displayed,
then press the
Track Knob (21)
to save your settings. If your settings were saved correctly,
Saving
will appear briefly in the
VFD Display (23)
.
NOTE
: You can exit the internal menu anytime you want by pressing the
Folder Knob (1)
,
however your modified settings will not be saved.
1.
Playlist
–
Normal / Title/ Artist / Album / Genre
o
The Database Builder can generate a playlist for USB devices. You can adjust
various criteria in order to filter tracks in this setting. You can turn the
Track
Knob (21)
or
Jog Wheel (16)
to scroll through the different settings;
Normal /
Title/ Artist / Album / Genre
. Read more about this in chapter 16 (Playlist
Operation).
2.
Repeat Mode
– 3 different modes:
Play All Repeat / Folder Repeat / Track Repeat
3.
MIDI CH
– Setup MIDI Channel from 1 to 16 (Deck A - Mixer - Deck B).
4.
MIDI Setup
o
TAP = Hold/Toggle
o
I/O
= Hide/DIS. (Hide/Display MIDI I/O value)
5.
Crossfader
o
LOCK = To lock the crossfader in the middle of the two channels
o
UNLOCK = The crossfader is back to normal status
6.
Crossfader Reverse
o
ON = Reverse the crossfader
o
OFF = Normal Mode
7.
Display Time
– 0.5 ~ 12.0 secs. (Line name start/stop time adjustment)
8.
Scroll Speed
– 50 ~ 2000 msecs. (Adjust the scroll speed of the character display)
9.
Sensitivity
– Touch Wheel Sensitivity adjustment (Adjustment range is -20 ~ +20)
A.
INTENSITY
– VFD Brightness (Brightness Range is 1 ~ 4)
B.
A.CUE LEVEL
– Change the Auto CUE level (Level range is -36 ~ -78dB)
C.
LINE SETUP
– Select VFD line name and display
D.
BIT RATE
– Display ON/OFF
E.
VERSION
– CXX (Control Version) DSPXX (DSP Version)
F.
LOAD DEFAULTS
– Press the
Track Knob (21)
to change all settings back to default.
G.
EXIT & SAVE
– Exit & Save your custom settings until you power down. Press the
Track Knob (21)
to exit & save.
