American Audio Versadeck, Руководство пользователя

Страница: 65 / 76

©American Audio® - www.americanaudio.eu Versadeck™ User Manual Page 65
30~3B => LED (-30, -20, -10, -7) ON
3C~47 => LED (-30, -20, -10, -7, -4) ON
48~53 => LED (-30, -20, -10, -7, -4, -2) ON
54~5F => LED (-30, -20, -10, -7, -4, -2, 0) ON
60~6B => LED (-30, -20, -10, -7, -4, -2, 0, +2) ON
6C~77 => LED (-30, -20, -10, -7, -4, -2, 0, +2, +4) ON
78~7F => ALL LEDS ON (-30, -20, -10, -7, -4, -2, 0, +2, +4, +7)
CC-R
ELATIVE
(ENC) T
YPE
Control Change messages are sent with status 0xBn, where n is the channel for the specified
CC controller. Thus, the controller MIDI ID is indicated with the channel along with the CC
number. The value ranges from 0x40 to indicate the change in the controller. This is an offset
to 0x40 “one’s complement” notation. A message with data 0x43 indicates a positive change
of 3. A messages with data 0x31 indicates a negative change of 15.
S
WITCH
ON/OFF (SW, C
ENTER
T
YPE
)
These messages are used for switches. Control Change messages are sent with status 0x9n,
Switch On and Off values are 0x7F and 0x00, where n is the channel.
LED ON/OFF (LED T
YPE
)
These messages are used for LEDs. Control Change messages are sent with status 0x9n, LED
On and Off values are 0x7F and 0x00, where n is the channel.*