©American Audio® - www.americanaudio.eu Versadeck™ User Manual Page 42
Exiting a Loop
– To exit a seamless loop, press the
OUT
Button (22)
.
The
IN Button (22)
and
OUT Button (22)
LEDs will remain
lit. Music playback will resume normal play.
The
IN Button (22)
and
OUT Button (22)
LEDs will remain
lit to remind you that a loop is in memory.
Replay Loop
– The
Reloop (22)
function allows you to
return to your stored loop at any time.
The
IN Button (22)
and
OUT Button (22)
LEDs will indicate
a loop is stored in memory, and may be played at any
time.
To replay the loop, press the
Reloop Button (22)
.
The
IN Button (22)
and
OUT Button (22)
LEDs will again
begin to flash indicating seamless loop mode has been
activated and your loop will immediately begin to play.
12.9.1
E
DITING A
L
OOP
Please Note:
Only the end point of the loop may be edited. You may make your loop shorter
or longer. Before you can edit your seamless loop you obviously must first have created a
seamless loop to edit. If you haven’t created a seamless loop, follow the instructions above to
create a loop. If a seamless loop has already been created, press the
Reloop Button (22)
to
activate your seamless loop if it is not already activated.
