AMD 601XL / 601XLI / 650LS / 650LSi SLSA MAINTENANCE MANUAL
________________________________________________________________________
SECTION III
INSPECTION
GENERAL
This section provides instructions for conducting scheduled inspections, unscheduled
inspections, replacement of time limited parts and corrosion control. Repair or
replacement instructions for those components found to be unserviceable are in the
sections covering the applicable aircraft system.
Lubrication and servicing intervals should be adjusted to take into account the aircraft
operating conditions.
All of the inspections are generally visual inspections unless otherwise specified. They
are to be performed by trained and qualified personnel using appropriate tools and
adequate lighting.
Prior to commencing the scheduled inspections listed in Table 1:
a.
Thoroughly clean the aircraft and engine;
b.
Remove and or open the necessary inspection and access panels, the engine cowlings,
the spinner and the optional wheel fairings; and
c.
Review the aircraft records for outstanding “SAFETY ALERTS”, “SERVICE
BULETINS” and “NOTIFICATIONS”. You must contact the manufacture for the
latest list of above documents.
Manufacturer can be contacted by telephone at 478-374-2759 or by fax at 478-
374-2793 or by mail at 415 Airport Road, Eastman GA, 31023 USA.
For engine and propeller Service Bulletins, Airworthiness Directives, and Service
Letters, contact the original manufacturers.
Section F2295 of the ASTM SLSA lists the Owner/Operator Responsibilities for
Continued Operational Safety Monitoring of a Light Sport Airplane. Complete and
submit Form #1 for maintenance, service and safety difficulties.
Note: In addition to the tasks specified in Table 1, do the preflight inspections described
in the Owner’s Manual. For mechanics who are not familiarized with the aircraft, use the
+40 page Pre-Flight check list as an extra guide. Available from the manufacturer.
SCHEDULED INSPECTIONS
Scheduled inspections include the items listed in Table 1 Inspection Form, the
overhaul requirements for the engine and propeller, the calendar time inspections and the
one-time inspections done following specified tasks. Do the following:
Inspection Form Requirements
Perform the tasks in Table 1 at the intervals shown.
Overhaul Requirements
a.
Overhaul the engine (Continental 0-200). See engine manuals
b.
Overhaul the propeller. See propeller manufacturers instructions
Replacement of Airframe Time Limited Parts
No parts listed at this time.
July 09
3.1