TABLE 1 – ZODIAC INSPECTION FORM
Type of Inspection
(Circle One)
50 100 500 1000
Symbols: + Indicates perform task, - Indicates do not perform task
Task
Refer to
Intervals
(Flight Hours)
Initials
50
100
500
1000
2.
Check security, condition, etc., of lateral
stop and bolts and axle bolts.
3.
When removing wheels, inspect the brake
assemblies, axles, pins and spacers for
security, condition, leaks, etc.
4.
Check the brake pads and brake discs for
excessive wear.
5.
Inspect the main wheels for cracks,
corrosion, etc.
6.
When removing wheels re-pack wheel
bearings.
7.
Inspect the master and slave brake cylinders,
brake lines, connections for damage,
corrosion, leaks, etc. Service the master
brake cylinders.
7a Inspect the rubbers at the main landing
gear attachments for condition and
abrasion damage, and position
8.
When removing wheel, the airplane hoisted
remove the nose wheel and inspect wheel for
cracks, corrosion, etc.
9.
Inspect the nose gear lower front bearing
plate, cam centering, steering connections
strut, strut supports and stop plate for cracks,
distortion, corrosion, etc.
10.
Inspect the steering rods for security,
distortion, etc.
11.
Inspect the shock cord for damaged threads
and weakness.
12.
Inspect the lower shock ring support for
cracks, distortion, etc.
13.
Check tire pressure. (30 PSI)
14.
When removing wheel, inspect the nose
wheel axle bolt, spacers and axle for wear,
damage, corrosion, etc.
-
-
-
-
-
-
-
-
-
-
-
-
+
-
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
July 09
3-7
Inspection page 5 of 8
