TABLE 1 – ZODIAC INSPECTION FORM
Type of Inspection
(Circle One)
50 100 500 1000
Symbols: + Indicates perform task, - Indicates do not perform task
Task
Refer to
Intervals
(Flight Hours)
Initials
50
100
500
1000
14.
Inspect engine for security of all attaching
hardware (nuts, bolts, screw, etc.)
15.
Perform valve clearance check
16.
Inspect the ignition harnesses for general
condition.
17.
Inspect the carburetor air intake box for
leaks.
18.
Drain carburetor and clean carburetor fuel
strainer and strainer bowl.
19.
Inspect engine cowlings for cracks,
damage, loose rivets, etc.
20.
Inspect the vacuum pump, lines and
separator, if installed.
21.
Change the Oil filter.
22.
Inspect the oil radiator, oil lines and
attaching brackets (if installed).
23.
Clean and flush oil radiator (if installed).
24.
Inspect engine, firewall and firewall seals
for deterioration, cracking, etc.
25.
Inspect cabin heat control box for cracks,
condition, etc.
26.
Inspect engine controls for defects,
safeties, etc. Check control travels.
27.
Check starter, alternator, fuel pump and
vacuum pump for proper mounting, security
and defects
28.
Perform operational checks of all systems
(fuel, oil, heating, etc.)
29.
Run engine and check:
- Magneto drop:
- Full power RPM
- Idle RPM
30. Check and adjust magnetos only if
discrepancies were noted in step 29.
N/A on 0-200 model
-
-
+
+
-
+
-
-
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
-
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Nov. 09
3.4
Inspection page 2 of 8
