Amcrest IP3M-943 Скачать руководство пользователя страница 12

Страница: 12 / 119

Stick the installation sticker on the designated surface where the device will be installed (wall or ceiling).

Drill 3 holes through the holes on the installation sticker.

Open the accessories bag and take out the expansion bolt and insert it into the holes.

Open accessories bag and take out the screws. Tighten the 3 screws to fix the device on the installation
surface (wall or ceiling).

Loosen the sunshade screw to move it around to the desired position, then tighten the screw to lock it into
place.

Plug in the camera to power it, using either an Ethernet or power cable.

Using a Philip’s head screwdriver, (not included) loosen the adjusting screw near the base of the camera. This

allows the camera to be rotated, as well as pivoted within the ball joint.

Adjust the device to the desired position.

Using a Philip’s head screwdriver, (not included) tighten the adjusting screw near the base of the camera to

lock the camera in position.

An installation guide video can be found at Amcrest.com/videos

3.3 Installation Guide

To install a microSD card into your camera, please refer to the step by step guide below:

Note:

You will need a Phillips head screw drive to access the microSD card slot for your camera.

Remove the access panel on the bottom of the camera with your Phillips head screwdriver.

Locate the microSD card slot on the back of your device. (under the factory reset switch)

Содержание IP3M-943























































































































Результаты поиска

Содержание IP3M-943

Отзывы:

Бренды по названию

Популярные бренды

Amcrest IP3M-943, Руководство пользователя

Результаты поиска

Содержание IP3M-943

Отзывы:

Бренды по названию

Популярные бренды