Amcrest IP3M-943, Руководство пользователя

Страница: 113 / 119

113
•
ActiveX controls have been disabled.
•
The PC is not using DirectX 8.1 or higher. Upgrade to a more recent version of DirectX.
•
The camera is having network connection errors.
•
Web access may be setup incorrectly.
•
The username or password may be incorrect.
12. Web Access live view is only displaying a static picture. Both live playback and recorded playback aren't
working.
Below are a few possible reasons why this may be occurring:
•
The network speed is not sufficient to transfer video data via web access.
•
The client PC may have limited resources.
•
Multicast mode may be causing this issue.
•
A privacy mask or screensaver may be enabled.
•
The logged in user may not have sufficient rights to monitor real-time playback.
•
The camera’s local video output quality is not sufficient.
13. Network connection is not stable.
Below are a few possible reasons why this may be occurring:
•
The network is not stable.
•
There may be an IP address conflict.
•
There may be a MAC address conflict.
•
The PC or camera network card may be defective.
•
The WiFi network the camera is picking up is too weak.
14. The alarm signal cannot been disarmed.
Below are a few possible reasons why this may be occurring:
•
An alarm may be setup incorrectly.
•
An alarm output may have been manually opened. There may be an error in the
camera’s firmware.
15. Alarms are not working.
Below are a few possible reasons why this may be occurring: