manualshive.com logo in svg

AMCI NR60E2, Руководство пользователя

Пользовательский мануал AMCI NR60E2 доступен для скачивания бесплатно. Загрузите его с {сайта} и ознакомьтесь с подробной информацией о продукте. Воспользуйтесь мануалом для эффективного использования устройства и извлечения максимальной выгоды из его функционала.

Поделиться
Скачать
background image

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254  Fax: (860) 584-1973  http://www.amci.com

75

PROFINET Reference

PROFINET P

ARAMETERS

PROFINET Parameter Names

The following section introduces the additional parameters and name changes that are defined by the 

PROFINET specification. 

Compatibility Mode 

This parameter is used to configure the NR60E2 to be compatible with V3.1 of the encoder profile. When set 
to its enabled state, the NR60E2 acts as a V3.1 encoder. The 

Control by PLC / Control Requested

  handshake 

protocol is not used and the Alarm Channel Control and Tolerated Sign-of-Life Faults parameters are 
enabled.

Class 4 Functionality 

This parameter selectively enables or disables Class 4 functionality. When set to “0”, the Code Sequence, 
Scaling Function Control, and Preset parameters are forced into their disabled states. When these parameters 
are disabled, position values will increase with CW rotation and the NR60E2 will report position and velocity 
at their maximum resolution of 65,536 counts per turn. Position values will be reported at the maximum num-
ber of turns supported by the NR60E2.

Code Sequence

Code Sequence in the term used by the PROFINET specification for the Count Direction parameter. This 
parameter allows you to set the direction of shaft rotation needed to produce increasing counts. The default is 
CW when looking at the shaft. This parameter is ignored when the Class 4 Functionality parameter is set to its 
disabled state and CW rotation will produce increasing counts.

Scaling Function Control

The name and functionality of this parameter does not change, however, this parameter is 
forced into its disabled state when the Class 4 Functionality parameter is set to its disabled 
state. Therefore, if the Class 4 Functionality parameter is set to its disabled state, the Scaling 
Function Control, MUR, and TMR parameters are ignored and the NR60E2 reports position at 
its maximum resolution and number of turns.

Measurements Units per Revolution

Measurements Units per Revolution (MUR) is the term used by the PROFINET specification for the Counts 
Per Turn parameter.

Preset Control - G1_XIST1

This parameter determines if the position value reported in the network data as signal G1_XIST1 can be pre-
set or offset using network commands. G1_XIST2 and G1_XIST3 can always be preset or offset. 

A value of  “0” disables presetting G1_XIST1.

A value of  “1” enables presetting G1_XIST1.

This parameter is only used if the 

Class 4 Functionality

 parameter is set to its enabled state. If 

the 

Class 4 Functionality

 parameter is set to its disabled state, none of the three position sig-

nals can be preset.

Alarm Channel Control

This parameter is only used when the NR60E2 has its Compatibility Mode parameter enabled. (The NR60E2 
is configured as a version 3.1 encoder.) This parameter controls the amount of data sent over the alarm chan-
nel. When reset to “0”, only communication related alarms are sent via the alarm channel. When set to “1”, 
encoder specific faults are also sent via the alarm channel. 

Содержание NR60E2



































































































Отзывы:

Нет отзывов

Похожие инструкции для NR60E2

Underhill Novo Operation Manual preview
Novo
Бренд: Underhill Страницы: 30
Unipower SLI 15 User Manual preview
SLI 15
Бренд: Unipower Страницы: 19
APsystems DS3 Series Installation & User Manual preview
DS3 Series
Бренд: APsystems Страницы: 24
Lenze ETW-i700-C01 Manual preview
ETW-i700-C01
Бренд: Lenze Страницы: 28
Manhattan 151047 Instructions preview
151047
Бренд: Manhattan Страницы: 2
Icy Box IB-CVB513 Quick Installation Manual preview
IB-CVB513
Бренд: Icy Box Страницы: 2
Avermedia AVerKey Lite Quick Start Manual preview
AVerKey Lite
Бренд: Avermedia Страницы: 1
Sendix PROFI BUS Multiturn 5868 Series Technical Manual preview
PROFI BUS Multiturn 5868 Series
Бренд: Sendix Страницы: 22
Magtek MT-95 Installation And Operation Manual preview
MT-95
Бренд: Magtek Страницы: 54
Linear Technology DC1887A Demo Manual preview
DC1887A
Бренд: Linear Technology Страницы: 6
Califone 2385-03 Owner'S Manual preview
2385-03
Бренд: Califone Страницы: 20
ADF Web HD67668-A1 User Manual preview
HD67668-A1
Бренд: ADF Web Страницы: 25
Kramer 840Hxl User Manual preview
840Hxl
Бренд: Kramer Страницы: 30
B&B Electronics 485ABOIC Quick Start Manual preview
485ABOIC
Бренд: B&B Electronics Страницы: 2
Cypress DCT-9D Operation Manual preview
DCT-9D
Бренд: Cypress Страницы: 12
Hagstrom KEUSB24 User Manual preview
KEUSB24
Бренд: Hagstrom Страницы: 24
GefenTV GTV-192KUSB-2-ADAUD User Manual preview
GTV-192KUSB-2-ADAUD
Бренд: GefenTV Страницы: 36
Radial Engineering 9000-0033-6922 User Manual preview
9000-0033-6922
Бренд: Radial Engineering Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды