AMCI NR60E2, Руководство пользователя

Страница: 40 / 98

S
ET THE
IP A
DDRESS AND
P
ROTOCOL
NR60E2 User Manual
ADVANCED MICRO CONTROLS INC.
40
3.3d Use the AMCI NET Configurator Utility (continued)
3.3d.1 Download the AMCI Net Configurator Utility
The AMCI Net Configurator utility is available on our website, www.amci.com . It can be found in our Sup-
port section under Software . The program exists as a ZIP file.
3.3d.2 Install the AMCI Net Configurator Utility
Once downloaded, simply extract the program from the ZIP file and run the program to install the AMCI Net
Configurator utility on your computer. The software installs as most products do, giving you the option to
change the file locations before installing the utility. Once the install is complete, a link to the utility is avail-
able on the Start Menu. Note that the install process only copies the utility to the designated location and cre-
ates links to the Start Menu. No changes are made to registry settings.
3.3d.3 Verify that Your Host Controller is Disconnected from the NR60E2
The NET Configurator Utility uses EtherNet/IP to communicate with the NR60E2. EtherNet/IP is not a multi-
master protocol. There can be only one bus master on the network at a time. In order to program the
NR60E2, the AMCI NET Configurator utility must act as a bus master. Therefore, physically disconnect
your host controller from the NR60E2 before starting the NET Configurator utility.
3.3d.4 Apply or Cycle Power to the NR60E2
Cycling power to the NR60E2 will reset any connections it may have with the host controller.
3.3d.5 Start the AMCI NET Configurator Utility
Double click on the utility’s icon. A welcome screen similar to the one in figure T3.6 below will appear.
Figure T3.6 NET Configurator Welcome Screen