AMCI NEXUS NX2A4E2, Руководство пользователя

Страница: 33 / 76

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com
NX2A4E2 User Manual
I
NSTALLING THE
NX2A4E2
33
1.3a DIN Rail Mounting (continued)
1.3a.3 Dimensions
Figure T1.2 shows the dimensions of the NX2A4E2 module when mounting on a DIN rail. The NX2A4E2 mod-
ule is a low power device that does not require any additional spacing when mounting the unit.
Figure T1.2 NX2A4E2 Outline
The plastic DIN rail brackets electrically isolate the NX2A4E2 from the rest of the system. A
grounding wire from the grounding connection on the power connector to the system ground bus
must be installed. Refer to 1.4,
Power Wiring on page 35 for additional information.
You will need to ground the resolver cable shields at the unit. There is a shield pin on each trans-
ducer input connector, but you have the option to ground them on the DIN rail as well.
3.04"
3.69"
3.74"
1.39"
3.35"
1.72"
3.76"
4.41"
4.46"
5.75"
5.95"
EN 50 022 Channel.
Not Included With the Unit.
DIN Mounting Bracket, Foot Mount Position
See Instructions for attaching to the NX2A4E2.
Bracket accepts EN 50 022 or EN 50 035 Channel.
DIN Mounting Bracket, Rear Mount Position
See Instructions for attaching to the NX2A4E2.
Bracket accepts EN 50 022 or EN 50 035 Channel. EN 50 022 Channel.
Not Included With the Unit.
1 2
NEXUS
RESOLVER
LINK2
PORT 2 PORT 1 MS
NS LINK1
1 2 3 4 5 6 7 8