AMCI ANR2, Руководство пользователя

Страница: 40 / 62

N
ETWORK
I
NPUT
D
ATA
F
ORMAT
ADVANCED MICRO CONTROLS INC.
5
40
Module Status Word Format (continued)
Bit Descriptions (continued)
(Continued from previous page.)
Table 5.3 Module Status Error Code Bits
Error Code Name Description
5 Sensor Sensitivity Error
The Sensor Sensitivity parameter is outside of its
range of 0.1 to 5,000.0 mV/V/{distance} This
parameter is programmed with 0.1 millivolt resolu-
tion, with a range of 1 to 50,000.
6 Sensor Displacement Error
The Sensor Displacement parameter is outside of its
range of 5 to 10,000.
7 Null Align Error
You attempted to set the Null Position value when
the A-D Converter value was greater than ±255
counts away from the sensor’s null position.
8 Min/Max Align Error
1) You attempted to set the Min or Max Position to
a value greater than ±65,535 counts from the
programmed Null Position value.
2) You attempted to set the Min. or Max. Position
Value when there was less than a 100 count dif-
ference in ADC value between this position and
the Null Position.
3) You attempted to set the Min. and Max. Position
Value on the same side of the Null Position.
4) While using the Two Point Alignment method,
you attempt to set the Minimum and Maximum
Values to the same count.
9-11 Reserved Reserved for future use.
12 Excitation Error
The ANA2 cannot measure the Excitation Voltage it
is outputting on the +EXC pin.
13-15 Reserved Reserved for future use.