EN
Table 2 Electromagnetic Compatibility 1
Magnetic field at
the power supply
frequency (50/60Hz)
according to IEC
30A/m (50Hz)
30A/m (50Hz)
Table 3 Electromagnetic Compatibility 2
Guidelines and manufacturer’s declaration – resistance to electromagnetic interference
The aScope™ Duodeno is intended for operation in the electromagnetic environment
specified below. The user of the aScope™ Duodeno should ensure that it is used in such an
environment
Electromagnetic
compatibility testing
IEC 60601 test level
Compliance level
Electromagnetic
Environment
Guidelines
Line-conducted HF
coupling according to
IEC 61000 – 4 – 6
Electromagnetic
fields according to
IEC 61000 – 4 – 3
3 V;AM/1 kHz/
80%150 KHz – 80
MHz
3V/m;
80 MHz – 2.7 GHz
3 V
3 V/m
Portable and mobile
radio equipment
should not be used
closer to the unit,
including cords,
than the recom-
mended safety
distance calculated
according to the
formula appropriate
to the transmission
frequency:
d=3.5/3 √P up to
80MHz
d=3.5/3 √P 80MHz
– 800MHz
d=3.5/3 √P 800MHz
– 2.5GHz
where P is the
nominal power of
the transmitter in
watts and d is the
safety distance in
meters.
The field strength of stationary transmitters should be lower in all frequencies than the com
-
pliance level, according to an examination on site. Malfunctions are possible in the vicinity of
equipment with the following symbols.
Table 4 Electromagnetic Transmition
Guidelines and manufacturer’s declaration – resistance to electromagnetic interference
The aScope™ Duodeno is intended for operation in the electromagnetic environment specified
below. The user of the aScope™ Duodeno should ensure that it is used in such an environment.
25
