background image

Appendix 3.1 Network Setup

When preparing the network for connection to the displaying unit, the following should be considered:

Item

Standards used

Comments

Wireless 
communication

IEEE 802.11

The device uses a WPA_Supplicant to support WPA2 Wireless 
communication as TKIP and CCMP. The authentication and integrity of the 
communication is provided by the underlying FIPS 140-2 compliant 
chipset wireless driver.

LAN communication

IEEE 802.3
IEEE 802.3ab
IEEE 802.3az
PICMG3.1

The device uses a standard Gigabit Ethernet controller supporting a 
1000base-T interface.

Access test

ICMP / ping

Allowing ease-of-discovery for hospital IT infrastructure

Network adaptor 
configuration

DHCP

Only configurable through DHCP. Special configurations for the network 
adapter such as static IP are currently not supported.

Re-routing

The device does not support re-routing traffic from Wi-Fi to LAN or vice 
versa, therefore the device cannot act as a NAT (Network Address 
Translation) gateway.

PACS servers

DICOM

To support a broad range of network infrastructures and PACS servers, 
the device supports DICOM without CMS (Cryptographic Message Syntax) 
encryption for transporting images and video to the PACS server.

Ports

There are no open ports, the device firewall only accepts TCP responses 
for DICOM and replies to ICMP ping requests.

Appendix 3.2 Data at rest and in transit

The displaying unit uses SQLite3 databases to secure information about the scopes, procedures and network 
configurations. The SQLite database is not accessible from the GUI, but images, videos and a limited log can be exported 
to a PACS server and/or USB device.

The following exportable data are stored:

Item

Format

Comments

Images

DICOM object / PNG

Video

DICOM object / MP4 
(h.264)

Ambu 
Application log

Clear-text format

The log files exported are mainly for troubleshooting purposes by 
Ambu staff, in case you encounter problems with the displaying unit. 
The files are compressed in a format more secure than Windows 
standard compression function. Unzipping the data requires a third 
party tool (e.g. 7-zip).

45

EN

Содержание 405011000

















































Отзывы: