AMBOSS AMB-50MT-OPTI, Руководство по эксплуатации, Страница: 58 / 93

Version 1.1.1 dated February 25th, 2013
Page 58
Original operating instructions
GB
The LEDs on the X axis indicate the diameter value of the last entry. The new entered value
is displayed on the LED on the Y axis. 

Enter the diameter value on the circle and then press the key to confirm your
entry. 
The display at the top right displays and indicates that you can now
enter the number of holes which need to be distributed. The LEDs on the X axis display
the last entry of the number of distributed holes. The new entered value is displayed on
the LED of the Y axis.

Enter the number of the holes which need to be distributed. Press the key to
confirm your entry. The display at the top right displays and indicates
that you can now start entering values for the angle of the starting point. 
The LEDs on the X axis display the value of the angle of the starting point of the last
entry.

The new entered value is displayed on the LED on the Y axis.

......Enter the value of the angle of the starting point and press the key to 
confirm your entry. The display at the top right displays and indicates
that you can enter the value of the angle of the end point. The LEDs on the X axis dis-
play the last input value of the angle of the end point. The new entered values are dis-
played on the LED of the Y axis.

Enter the value of the angle of the end point and press the key to confirm your
entry. When you have completely entered the parameters you go to the mode of the
automatic machining. The display at the top right displays and indica-
tes that the sequence number of the holes which are machined is currently 01. 
The two axes which comply with the selected coordinate layer represent the coordinate
values relative to the position of the hole which is currently machined. The other axis is
displayed as standard.
II. In the mode subdivided hole
in the circle machining after having pressed the key 
in order to select the number of holes you can now move the machine tool to 
the display X and Y axis . This is the position of this hole on the circle. 
Press the key in order to select the next hole and the sequence number of the hole is