AMBOSS AMB-50MT-OPTI, Руководство по эксплуатации

Страница: 50 / 93

Version 1.1.1 dated February 25th, 2013
Page 50
Original operating instructions
GB
6.4 Conversion of radius/diameter on the X axis
Introduction of the function: When the position display is in the standard display mode the
radius/diameter conversion of the value of the X axis is displayed.
Example: Modify the radius/diameter display of the X axis.
Proceeding:

Go back to the standard display mode;

Press the key when the display light R/D is illuminated i.e. 
the displayed value on the X axis is the diameter and when the display light R/D is off it
means that the value which is displayed on the X axis is the radius.
6.5 Lathe/milling machine switching the function
Introduction of the function: To switch over the mode for the lathe/milling machine.
Proceeding:

Go back to the standard display mode; 

Press the key the mi display light is illuminated. I.e the 
function mode is "Milling machine";

Press the key the mi display light is off. I.e. the function mode is "Lathe". When
you are in the function mode lathe you have the function to convert radius/diameter the
function to display the Z+Z0 value on the Z axis and the CSS function.
6.6 Setting of the machining zero point
Introduction of the function: To set the coordinates to the machine zero point in order to set
an absolute measuring position to zero.
Example: Set the coordinates of the tool data on the X axis to 20.00. (Assume that the tool is
positioned at X=10'000, the display light of the X axis is illuminated)
Proceeding:

Go back to the standard display mode; 

Press the key the corresponding display light is illuminated, the display value
amounts to zero;

Enter the value 20 by pressing the key and the key ;

When you press the key the X axis shows -10'000. Move the tool so that the dis-
play value becomes 0.000;