AMBOSS AMB-50MT-OPTI, Руководство по эксплуатации

Страница: 51 / 93

Version 1.1.1 dated February 25th, 2013 Page 51 Original operating instructions
GB

Press the key and the display light turns off. The actual position which is now dis-
played on the X axis amounts to 20'000.
6.7 Function of tool data
Introduction of the function:
The displayed values are all relative to the selected data. The use of the data can enable to
create a certain ratio between the reader offset and the display value. It is allowed to create 7
data for this position display type.
Example: In order to create the data coordinates for the tool 2 (X=1'000, Y=2'000)
Proceeding:

Go back to the standard display mode; 

Press the key select the tool 2 (the display light on the key 
is illuminated);

Press the key call the initial values of the two axes again (the display light on the
key is illuminated);

Press the key select the X coordinate axis (the display light beside the key
is illuminated);

Enter and ;

Press the key select the Y coordinate axis (the display light beside the key
is illuminated);

Enter and ;

Now the X axis shows 1'000 and the Y axis 2'000.
Remark: The saving function to set the data is only working when the position display is in the
mode reference marking and the machine is at standstill.