AMAZONEN-Werke EK-S 150 страница 64 Скачать руководство пользователя

Страница: 64 / 76

Operation

EK-S/EK-SH BAG0022.4 07.22

10.2

Spreading operation

●

The machine has been coupled onto the tractor.

•

The hydraulic hoses are connected.

•

All settings are made.

Spread rate setting

Spreading vane position

Shutter slide rods for shutter slide A, B hooked or unhooked.

EK-S

: Working width adjustment on the spread deflector

The spreading disc rev. speed is 540

min

, if there is no other

speed given in the spread rate table!
Engage the universal joint shaft at a low tractor engine speed.

Danger!
Do not approach rotating spreading discs. Danger of injury.

Danger from particles being thrown around. Advice people to

leave the danger area!

If the implement is transported over longer distances with filled

hopper, ensure a correct spread rate when starting the spreading

operation.
Maintain a constant spreading disc rev. speed and forward

speed.

Danger!
Before commencing any operation with the fertiliser spreader

ensure that all safeguards are present and fitted in the correct

position (Seite 31).

Prior to any operation ensure the proper condition of the fixing

parts, especially the fixing of spreading discs and spreading

vanes.

Headlands

Close shutter slides when turning on the headlands!

Field sides

The one-sided field side spreading is possible. To do this, re-

lease each one switch rod and deactivate shutter slide A or B,

see Seite 36.

After operation

•

Close shutter slide.

•

Switch off the universal joint shaft.

Содержание EK-S 150













































































Результаты поиска

Содержание EK-S 150

Отзывы:

Похожие инструкции для EK-S 150

Бренды по названию

Популярные бренды

AMAZONEN-Werke EK-S 150, Руководство по эксплуатации

Результаты поиска

Содержание EK-S 150

Отзывы:

Похожие инструкции для EK-S 150

Бренды по названию

Популярные бренды